APMM Community Forum : Materials
Welcome Guest   
 
 Subject : Re:3D Printed Parts with a Chrome Finish.. 03/15/2019 12:37:01 PM 
*TANYA SCHRODER
Posts: 3
Location
We have also used Repliform and they did a great job. They have lots of different options as well.
 Subject : Re:3D Printed Parts with a Chrome Finish.. 03/15/2019 12:05:32 PM 
Lisa Gemmiti
Posts: 8
Location
Thank you both! I really appreciate the referral.
 Subject : Re:3D Printed Parts with a Chrome Finish.. 03/15/2019 08:36:55 AM 
Jake Urman
Posts: 10
Location: Manchester NH
I came here to recommend RePliForm as well. At my previous job I had them nickel plate objet parts for me all the time, and they always turned out great! Excellent customer service as well - (we had someone fly in and hand deliver us parts once in order to meet a deadline!)
 Subject : Re:3D Printed Parts with a Chrome Finish.. 03/14/2019 10:34:47 PM 
Michael Raphael
Posts: 1
Location
Hi Lisa, try the folks at Repliform for metal plated prints. They are awesome! More at http://www.repliforminc.com/
 Subject : 3D Printed Parts with a Chrome Finish.. 03/14/2019 10:28:29 PM 
Lisa Gemmiti
Posts: 8
Location
Hi Model Makers!

We are in the process of building a yacht and need 71 parts to be 3D printed and chrome plated.

The best resource I could find so far is i.materialise in Belgium for a minimum of $33 per tiny part.

Stratasys will also do it for $48 per part.

Let me know if you know a good resource for chrome finishing. It doesn't have to be metal on metal; it could be vacuum-metalized, but one quote we got for that cost 5x more than the other two.

Thank you for any advice you can give on this.

Lisa
 
# of Topics per Page